Domed Steel Oil Tank Triumph BSA LowBrow 3 Quart British

New never installed, used once in a mock up bobber project
Domed Oil Tank TIG welded
3 quart tank
Right side aluminum filler cap, vented.
Oil feed bung on bottom accepts stock style Triumph oil tank filter screen fitting.
Oil return fitting on bottom is restricted inside the tank the same as stock and has the proper ‘T’ for feeding oil to your rocker boxes.
Two 5/16″-18 mounts on top and one 5/16″-18 mount on bottom

Tank body is 10″ long including the spun domed ends, and is 5″ in diameter.

IMG_0627IMG_0628IMG_0629IMG_0632

1972 Triumph T120 650 Low Seat OIF Frame

Made by Triumph. This is one used motorcycle frame with legal documentation and bill of sale. The “Oil in frame” had all accessories removed and was degreased. There is a light coat of black spray paint to retard corrosion. This is a later 1972 frame and has the lower seat height (2nd design) The two front down tubes below the neck have small impressions from a engine guard / crashbar. The rear passenger peg mounts were removed. Other than these two items the frame appears to be unmolested. This frame is under 40 lbs but with packing materials we estimate shipping weight of around 50 lbs. We prefer however that the frame be picked up at our warehouse after PayPal payment has been made. Shipping charge would be refunded in full. If shipment is desired please contact me thru eBay messaging. We are only a few hours south of Daytona in Miami.

IMG_0468IMG_0469IMG_0472IMG_0476IMG_0478IMG_0481IMG_0484IMG_0482IMG_0483

Rare 1974 Triumph T120V Bonneville 650 Unit Engine Block Case

This is one used engine case for Triumph 650. Made in 1974 while the factory was struggling with a labor dispute/strike. My research shows that only around 980 units were produced that year, this is one of the 980. This was purchased for a project 2.5 years ago and has been stored indoors. Please look at the picture to see the condition, note the other item in the one picture. It helps explain background and provenance of the case. The T120V was produced as a five speed, so it can handle 4 or 5 speed transmission. IMG_3476IMG_3477IMG_3478IMG_3479

1972 – 1974 Triumph T120 650cc NOS Cylinder Head 71-2863 Casting 9 /10 Hole

This cylinder head casting has never been used, only the guides have been installed and the seats have never been finished. This casting is for a 10 bolt configuration, but has only been drilled for 9 holes. This would have been a late 1972 thru 1974 year of manufacture, parts were hard to get because of labor issues (strike) not many motorcycles were produced in these years, and even fewer spare parts. Somehow this made it to America. Works for any 9 hole application, with obvious possibilities for a 10 hole (T140?) application. Brand new out of the package New Old Stock part. This came with a load of Triumph parts we acquired.DCP_3616DCP_3615DCP_3617DCP_3618DCP_3619DCP_3620