This is a used aftermarket oil tank plate. Fits Knucklehead and Panhead Rigid frame and chopper projects that use this set-up. This is an aftermarket part that has been used and you can see were the clutch arm bangs into it.
This is a plastic tray that is used with the electronics on the Harley Softail models from 2001 up, check your old one for part number match. See pictures.
This is a used pair of Harley Davidson Road King switch housings that fit most Harley Touring Bikes from 1996 thru 2013. Light corrosion and a small chip in powder coat. Ready for use or paint them.
This is a used pair of Harley Davidson tank emblems, these are made by Harley but are not original to the 60’s. Part number 61776-61 T.
These have been on a bike for a while and have some patina. No screws or mounts included.
This is a used Harley Davidson wheel hub, this is for single disc and can drive older speedometers. This narrow hub is for 38 mm front forks like XL, FXR,FXD but will work with early 35 mm XL and FX. Harley part number is 43619-84. Uses early style rotor and takes 3/4 axle on Timken Bearings.
This is a pair of Dynatek coils part number DC3-1. They came from a closed shop and the box has been handled, but the coils were never installed.
3 ohm, 12 volt, angled single output (not for dual plug heads)
Sold in a pair
Dyna Coils are the industry standard, delivering 35,000 volts with spark energies second to none
Made to work with all points ignitions, aftermarket electronic ignitions and most factory electronic ignitions
Only use coils that are within 10% of the OEM coils standard resistance
Made in the U.S.A.
This is a group of 4 gaskets. James Gasket part number 34917-06F. Foamet construction. Fits Most Harley Davidson 6 speeds starting with the 2006 Dyna up thru 2013 on other models. JGI-34917-06F
This is a shift lever made by Custom Chrome to replace the worn or non-chrome factory part (33715-85) This is CCI number 30538. Used on Softail style transmissions from 1985 thru 1996. Very common on custom choppers with 5/6 speeds.
This is a running light made by Custom Chrome. Part number 19092.
This is a chrome battery cover made by Drag Specialties. Part number DS324120 and it replaces Harley number 66369-70 on the XLCH kick start only models of the Ironhead Sporty made from 1971 thru 1978.