DEI Protect-A-Wire™ Line Sleeve Part No. 906634 Design Engineering Inc

This listing is for DEI Protect-A-Wire™ Line Sleeve Part Number 906634 Design Engineering Inc

SKU: #906634 – Black – 8mm x 10ft

Add a professional look along with a layer of protection to your next accessory project with the help of DEI Protect-A-Wire™ Line & Hose Sleeving kits. These kits are great to use when installing taller handlebars, LED turn signals, stereos, license plate relocation, auxiliary lighting, and GPS units.

In addition to electrical wires, DEI Protect-A-Wire Line & Hose Sleeving is also useful for insulating cables and hoses running near exhaust or engine heat. Resistant to oil and chemicals, they are safe to use on oil and fuel supply lines as well.

Available in various diameters and colors, Protect-A-Wire Line & Hose Sleeving is woven glass fiber material that is heat treated, saturated with an acrylic binder, and good up to 500˚F. This offers superior heat protection and abrasion resistance over typical PVC or nylon alternatives. Finally, DEI won’t let you settle for the wimpy heat shrink tubing that you found in the junk drawer! The DEI kit includes Military spec, thick-wall, 3:1 shrink ratio tubing to form a water-tight protective barrier and seal the ends nicely.

Note: All kits that start with part number prefix 906XXX include 1 foot of heat shrink tubing, that can be cut to size.

DEI Under-Tank Heat Reflection Kit Part No. 902463 Design Engineering Inc

This listing is for DEI Under-Tank Heat Reflection Kit Part Number 902463 Design Engineering Inc

SKU: #902463 – Reflect-A-Cool Kit (Aluminized)

Hot fuel reduces engine performance, stresses the fuel pump, and can lead to vapor lock. Using race fuel? Race fuel manufacturers recommend using reflective materials to help keep specialty fuels temperature stable. DEI has come up with an effective kit to help combat this problem. Simply line the underside of your fuel tank with the self-adhesive Reflect-A-Cool™ material and trim to shape.

The DEI Reflect-A-Cool material is made up of a aluminized reflective foil backed with a base layer of glass fiber. Its rated to withstand continuous temperatures up to 400˚F degrees and can reduce fuel temps by up to 30%. Installation is easy, the material can be cut with scissors and lays down well to cover irregular shapes. This kit can be used with all tanks including metal, plastic and fiberglass.

Each kit includes a 24”x24” sheet of material along with a 1 ½”X 15ft. roll of tape to help cover seems and irregular shapes.

Key Features:

Reflects Radiant Heat
Reduce Fuel Temperature
Lower Stress on Fuel Pump
Reflect-A-Cool™ withstands temperatures up to 400° F

DEI Design Engineering Inc New Bodywork Protection Kit Part No. 902329

This listing is for DEI New Bodywork Protection Kit

DEI Bodywork Protection Kit
Heat protection for fairings and body panels. Great for Metric and V-Twin Motorcycles, ATV’s / UTV’s, Snowmobiles, Personal Watercraft.
Made in The USA

Tired of bubbling paint and scorched plastic on your ATV or motorcycle? DEI has come up with the perfect kit to keep the excess heat from engines and exhausts at bay using a combination of lightweight, flexible materials that form a reflective barrier against excess heat. Potential uses include using DEI’s thicker dimpled F&T-II Extreme Heat Shield material near any direct heat source such as exhaust, or combining it with a thin layer of Reflect-A-Cool material to provide maximum protection from damaging radiant heat from the engine and radiator.

This Bodywork Protection Kit is great for use on fairings, air boxes, seat pans, rear fenders etc. Installation is easy. All included materials have a self-adhesive backing and can be cut to shape and are designed to form fit to irregular shapes.

The kit includes: one 12” x 24” DEI Reflect-A-Cool™ heat reflective sheet, one 1-1/2” x 15 ft. roll of Cool Tape™, and two 10” x 10” sheets of F&T-II Extreme Heat Shield™. Reflect-A-Cool is constructed of fiberglass material backed with a layer of aluminized reflective foil. This moisture and solvent resistant material handles direct heat up to 400° F. F&T-II Extreme Heat Shield reflects direct continuous heat up to 1,750° F while DEI’s Cool Tape is an ultra-lightweight insulating tape that reflects heat up to 400°F providing added thermal protection and a secure seam.

DEI Black Motorcycle Exhaust Pipe Wrap Kit 901330 Design Engineering Inc

This listing is for DEI New Black Motorcycle Exhaust Pipe Wrap Kit – 901330 – Design Engineering Inc

DEI Exhaust Wrap Kits
Complete wrapping solution in one package

A simple and effective way to control heat, protect against serious leg burns and improve performance. DEI Pipe wrap kits contain everything needed to wrap a set of pipes on most V-Twin Motorcycles all in one convenient package.

Each kit includes two 2″ x 15 foot rolls of Black exhaust wrap, eight 8″ & four 14″ stainless steel Locking Ties to secure wrap and Black HT Silicone Coating spray that penetrates, seals, protects and preserves wrap.

A proprietary coating is applied to all DEI wrap to act as a bonding agent and to increase durability levels under extreme heat.

Prevent burns
Improve exhaust flow for better performance
Offers a custom style
Increase horsepower
Asbestos free & easy to install
Cost savings by purchasing as a kit
Withstands direct continuous heat up to 1200°F
Protects against abrasions, hot oil spills, road grime and more!
MADE IN THE USA

NOTE: HT Silicone Coating Spray can only be shipped by UPS Ground within the United States.

DEI Hi-Temp Flexible Heat Insulation Shrink Tube #010834 18mm x 4′

This listing is for Hi-Temp Shrink Tubing #010834 – 18mm x 4′

SKU: #010834 – 18mm x 4′ roll
Excellent water-tight wire protection for automotive, power sports application, marine use, and more!

Professional grade military spec flexible polyolefin tubing provides excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.
Offers clean professional look
Meets MIL Spec DTL-23053/5C
3:1 shrink ratio
Flame retardant
Alternate to plastic ties & tape
Use to insulate wires, connections, terminals, wire splicing & more
Thick wall construction & remains flexible
Operating temp range: -67°F to 275°F
Max Operating temp: 394°F for short duration (30 to 60 mins.)
Easy to install: Apply at 120 to 180°F using heat gun

DEI Hi-Temp Flexible Heat Insulation Shrink Tube 010833 12mm x 4′

This listing is for Hi-Temp Shrink Tubing #010833 – 12mm x 4′

SKU: #010833 – 12mm x 4′ roll

Excellent water-tight wire protection for any power sports application!

Professional grade military spec flexible polyolefin tubing provides excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.
Offers clean professional look
Meets MIL Spec DTL-23053/5C
3:1 shrink ratio
Flame retardant
Alternate to plastic ties & tape
Use to insulate wires, connections, terminals, wire splicing & more
Thick wall construction & remains flexible
Operating temp range: -67°F to 275°F
Max Operating temp: 394°F for short duration (30 to 60 mins.)
Easy to install: Apply at 120 to 180°F using heat gun

DEI Quick Fix Tape Waterproof Black Part No. 010491 1 in. wide x 12 ft. Roll

This listing is for DEI Quick Fix Tape #010491 1 in. wide x 12 ft. Roll

SKU: 010491 Black

High performance Quick Fix Tape bonds to itself and is self-curing, forming a waterproof permanent seal. It’s ideal for emergency hose repair, non-slip grip surface for tools, electrical splices and connections, serves as a temporary leak sealer, and does not leave a sticky residue after removal. Just a few of it’s many uses.

Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape.

Available in 1 in. wide x 12 ft. rolls
Withstands temperatures from -60 degrees F (-54 C) to 500 degrees F (260 C)
Seal ends of hoses, bundle & wrap wires, weatherproof connections & more
Can be applied to wet surfaces
Corrosion & moisture resistant
Permanent air / liquid tight seal
Resists solvents, oils, fuel, acids & chemical spills

DEI Performance Products Cool Tape 1-1/2″ x 15′ Roll Part No. 010408

This listing is for Cool Tape – Heat Reflective Tape

SKU: 010408 1-1/2″ x 15′ roll

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F and 2000°F radiant heat. Flexible and easy to apply. Strong self-adhesive backing. Use to secure panels, seal air boxes, wrap wiring & more.
Cool-Tape™ 1-1/2″ x 15ft roll

DEI Stainless Steel 8″ Locking Ties Part No. 010208 Design Engineering Inc

This listing is for DEI Stainless Steel Positive Lock Ties Part Number 010208 Design Engineering Inc

SKU: 010208

Stainless Steel Positive Locking Ties are designed for high heat applications. They are great for securing exhaust wrap or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use.

Made from 316 stainless steel
Tensile Strength. 5/15” 200 lbs. 1/2” 350 lbs.
Capable of withstanding in excess of 2500°F

Perfect for securing exhaust wrap, cables, wires or hoses that are close to a heat source

Automotive
Motorcycle
ATV/UTV
Marine
Aeronautical
Industrial

Locking Ties, Stainless Steel, 7mm 9 in. Long, Set of 8