A Pair of KN 137 Oil Filters 1981 -2015 Suzuki Motorcycle Savage DR650

Two KN-137 oil filters. Fitment below
2015 SUZUKI DR650S 644 – All
2015 SUZUKI BOULEVARD S40 652 – All
2014 SUZUKI DR650SE 644 – All
2013 SUZUKI DR650SE 644 – All
2012 SUZUKI DR650SE 644 – All
2011 SUZUKI LS650 BOULEVARD 650 – All
2011 SUZUKI DR650SE 644 – All
2010 SUZUKI LS650 BOULEVARD 650 – All
2010 SUZUKI DR650SE 644 – All
2009 SUZUKI LS650 SAVAGE 650 – All
2009 SUZUKI LS650 BOULEVARD 650 – All
2009 SUZUKI DR650SE 650 – All
2009 SUZUKI BOULEVARD S40 650 – All
2008 SUZUKI LS650 BOULEVARD 650 – All
2008 SUZUKI DR650SE 650 – All
2008 SUZUKI BOULEVARD S40 650 – All
2007 SUZUKI LS650 SAVAGE 650 – All
2007 SUZUKI LS650 BOULEVARD 650 – All
2007 SUZUKI DR650SE 650 – All
2007 SUZUKI BOULEVARD S40 650 – All
2006 SUZUKI LS650 SAVAGE 650 – All
2006 SUZUKI LS650 BOULEVARD 650 – All
2006 SUZUKI DR650SE 650 – All
2006 SUZUKI BOULEVARD S40 650 – All
2005 SUZUKI LS650 SAVAGE 650 – All
2005 SUZUKI LS650 BOULEVARD 650 – All
2005 SUZUKI DR650SE 650 – All
2005 SUZUKI BOULEVARD S40 650 – All
2004 SUZUKI LS650 SAVAGE 650 – All
2004 SUZUKI DR650SE 650 – All
2003 SUZUKI LS650 SAVAGE 650 – All
2003 SUZUKI DR650SE 650 – All
2002 SUZUKI XF650 FREEWIND 650 – All
2002 SUZUKI LS650 SAVAGE 650 – All
2002 SUZUKI GSX750 750 – All
2002 SUZUKI DR650SE 650 – All
2001 SUZUKI XF650 FREEWIND 650 – All
2001 SUZUKI LS650 SAVAGE 650 – All
2001 SUZUKI GSX750 750 – All
2001 SUZUKI DR650SE 650 – All
2000 SUZUKI XF650 FREEWIND 650 – All
2000 SUZUKI LS650 SAVAGE 650 – All
2000 SUZUKI DR800 800 – All
2000 SUZUKI DR650SE 650 – All
1999 SUZUKI XF650 FREEWIND 650 – All
1999 SUZUKI LS650 SAVAGE 650 – All
1999 SUZUKI DR800 778 – All
1999 SUZUKI DR650SE 650 – All
1998 SUZUKI XF650 FREEWIND 650 – All
1998 SUZUKI LS650 SAVAGE 650 – All
1998 SUZUKI DR800 778 – All
1998 SUZUKI DR650SE 650 – All
1997 SUZUKI XF650 FREEWIND 650 – All
1997 SUZUKI LS650 SAVAGE 650 – All
1997 SUZUKI DR800 778 – All
1997 SUZUKI DR650SE 650 – All
1996 SUZUKI LS650 SAVAGE 650 – All
1996 SUZUKI DR800 778 – All
1996 SUZUKI DR650SE 650 – All
1995 SUZUKI LS650 SAVAGE 650 – All
1995 SUZUKI DR800 778 – All
1995 SUZUKI DR650S 650 – All
1994 SUZUKI LS650 SAVAGE 650 – All
1994 SUZUKI DR800 778 – All
1994 SUZUKI DR650S 650 – All
1993 SUZUKI LS650 SAVAGE 650 – All
1993 SUZUKI DS650 650 – All
1993 SUZUKI DR800 778 – All
1993 SUZUKI DR650S 650 – All
1992 SUZUKI LS650 SAVAGE 650 – All
1992 SUZUKI DS650 650 – All
1992 SUZUKI DR800 778 – All
1992 SUZUKI DR650S 650 – All
1991 SUZUKI LS650 SAVAGE 650 – All
1991 SUZUKI DR800 778 – All
1991 SUZUKI DR650S 650 – All
1991 SUZUKI DR600RSE/M 600 – All
1991 SUZUKI DR600R/L/M 600 – All
1991 SUZUKI DR600 600 – All
1990 SUZUKI LS650 SAVAGE 650 – All
1990 SUZUKI DR800 778 – All
1990 SUZUKI DR650S 650 – All
1990 SUZUKI DR600R/L/M 600 – All
1990 SUZUKI DR600 600 – All
1989 SUZUKI LS650 SAVAGE 650 – All
1989 SUZUKI DR800 800 – All
1989 SUZUKI DR750 750 – All
1989 SUZUKI DR600 600 – All
1988 SUZUKI LS650 SAVAGE 650 – All
1988 SUZUKI DR800 800 – All
1988 SUZUKI DR750 750 – All
1988 SUZUKI DR600 600 – All
1987 SUZUKI LS650 SAVAGE 650 – All
1987 SUZUKI DR600 600 – All
1986 SUZUKI LS650 SAVAGE 650 – All
1986 SUZUKI DR600 600 – All
1985 SUZUKI SP600 600 – All
1985 SUZUKI DR600 600 – All
1984 SUZUKI DR500 OFF ROAD 500 – All
1984 SUZUKI DR500 500 – All
1983 SUZUKI SP500 500 – All
1983 SUZUKI DR500 OFF ROAD 500 – All
1983 SUZUKI DR500 500 – All
1982 SUZUKI SP500 500 – All
1982 SUZUKI DR500 500 – All
1981 SUZUKI SP500 500 – All
1981 SUZUKI DR500 500 – All
IMG_3205IMG_3206IMG_3207IMG_3208

Harley Davidson Shovelhead Cylinder Heads 1966 – 1977

One pair of used Shovelhead cylinder heads. These heads have been disassembled, cleaned, and then reassembled. These have studs in the exhaust bolt holes, inserts in the spark plug holes (short reach plugs), the fins are all intact and look like someone sanded or polished the edges, the heads had been painted black at one time. The valves are not terribly sunk in the chamber, but appear to be near the limit, the guide to valve clearance is very good. We believe someone did a valve job recently and replaced the original valves with nitrided valves. The valve seals were shoved back on, and need to be replaced before installing the heads. Whether you do a quick re-lapping or an all-out rebuild, these are a good set of heads. They have the larger valve guides, normally seen in 80 inch heads. So I am guessing they are from late 1977-1980 , because they are O-ring intake and not band style. AMF was mixing stuff up in those years. These will work for Pan-Shovel Conversions and all (1966-1984) years Shovelhead Motors when used with correct intake manifold.
IMG_3122IMG_3128IMG_3126IMG_3129

HiTech Products Tail Light Lens Material Kit Custom Motorcycle Auto

Opened box of lens material from HiTech Products, Drag Specialties # DS280469, HiTech Products # PSC002. This kit was opened and you can see the small sections that were removed for a project, the prismatic lens pieces are 1/8 inch thick, the clear (orange backing comes off) and red are each 1/4 inch thick. The squares measure 11.5 x 11.5 inches ( before they were cut) The brush and bottle that come with the kit were also used up. They are still available from HiTech if needed for around $8.00, this kit was 69.00 from Drag Specialties and newer less complete kits are $55.00.
The lens material is high quality. 4 pieces, 2 clear prism, 1 clear lens, 1 red lens.

IMG_3187IMG_3181IMG_3183IMG_3186

Low & Mean Brand Radiator Chin Fairing Yamaha Stryker 04S – 100

Purchased from a local auction, where a custom shop had gone out of business. This is new in the package as seen in the photos. We researched this online and it fits a Yamaha Stryker. It is made by a company called Low&Mean and has their part number 04S-100 on the package. It is hand made fiberglass construction and still needs painted. I provided a couple screen shots from our research and more information is available from the companies website. Not sure of the years it fits so you may want to look into that further. They say it does not work with highway bars or the V-Star 1300.

IMG_3174IMG_3175

Low & Mean Brand Front Fender Yamaha Raider 04-240R

Purchased from a local auction, where a custom shop had gone out of business. This is new in the package as seen in the photos. We researched this online and it fits a Yamaha Raider. It is made by a company called Low&Mean and has their part number 04-240R on the package. This is to replace your front fender and give a better style. It is hand made fiberglass construction and still needs painted. They say it is for the 21 inch standard front tire. I provided a couple screen shots from our research and more information is available from the companies website. Not sure of the years it fits so you may want to look into that further.IMG_3176IMG_3177

Suzuki GS250 300 450 GN 125 Headlight Assembly 35100-44250

Original Suzuki factory part number 35100-44250 headlight assembly, comes with bulb and bezel.
This Suzuki 35100-44250 HEADLAMP ASSEMBLY is used in the following models and assemblies:

1980 GS250T – HEADLAMP
1980 GS450L – HEADLAMP
1981 GS250T – HEADLAMP
1981 GS450L – HEADLAMP
1982 GN125 – HEADLAMP
1982 GS300L – HEADLAMP
1982 GS450L – HEADLAMP
1983 GN125 – HEADLAMP
1983 GS300L – HEADLAMP
1985 GS300L – HEADLAMP
1991 GN125E – HEADLAMP
1992 GN125E – HEADLAMP
1993 GN125E – HEADLAMP
1994 GN125E – HEADLAMP
1995 GN125E – HEADLAMP
1996 GN125E – HEADLAMP
1997 GN125E – HEADLAMP

IMG_3180IMG_3178